Install a Hitron CODA-47 Cable Modem

Follow these step-by-step directions to install the modem for Arvig cable modem internet. Have the username and password you received from Arvig when you upgraded your internet service, handy.

Click here to watch the how-to video and for printable PDF instructions.

Step 1: Remove the new modem from the box and place it flat on a desk or table.

Step 2: Remove the clear plastic covers from the device—do not block vents.

Step 3: Unscrew the coax cable and MAP* from the old modem and screw them both onto the coax cable port on the new modem. Important: you must connect the MAP* first. Securely tighten connections— do not overtighten.

Step 4: Use the provided power cord to connect the power socket to an appropriate power source. Look at the lights on the front panel; once the @ symbol light is solid (about 5 minutes), proceed with step 5.

Step 5: Unplug the ethernet cable from the old modem and plug it into ethernet port 1 on the new modem.

Step 6: Complete our online form to finish the setup process. Or, if you need help, chat with the Help Desk below.

*If applicable.

Updated: Mar 17, 2021